Configure Norton Internet Security Professional 2005

Start Norton Internet Security by clicking Start, then clicking Programs, then clicking the Norton Internet Security Professional directory, then clicking Norton Internet Security Professional.

Click Personal Firewall and then Click Configure.

Select  the Networking tab, and click the Add button.

Select the "Using a range" Button, then type in the below IP addresses. Once this is done, you can click "OK".

Confirm the address range on the "Trusted" tab matches the ones below, then click "OK".

Select the "Intrusion Detection" option and then click the "Configure" Button.

Click the "Advanced" button.

Deselect the "BAT Execution Via HTTP" check box and click "OK".

Click "OK" on the "Intrusion Detection" window.

Select the "Privacy Control" option, and then click the "Configure" button.

Click the "Advanced" button.

Click the Add Site button

Type Allstate.com and click OK.

Repeat these steps using Deerbrook.com and Encompassinsurance.com.  

After this has been done:

Make sure Allstate.com is highlighted on the left side and then Click the Global Settings tab.  Uncheck all of the Use default settings boxes.  Select all of the Permit radial buttons.

Repeat these steps using Deerbrook.com and Encompassinsurance.com.  

After this has been done:

Make sure Allstate.com is highlighted on the left side and then Click the User Settings tab.  Uncheck all of the Use default settings boxes.  Select all of the Permit radial buttons.

Repeat these steps using Deerbrook.com and Encompassinsurance.com.  

After this has been done:

Select the "Ad Blocking" tab and click "Add".

Select the "Permit" button and Type Allstate.com and click OK.

Confirm that "Allsate.com" is in the "Ad Blocking" window and the action is "Permit" with the green dot.  

Repeat these steps using Deerbrook.com and Encompassinsurance.com.  

After this has been done:

Click OK and close Norton Internet Security.

 

Updated: 02/25/2005 08:28 AM